Pan

The Pan option allows you to move the model in any direction within the view. To Pan:

1. Select the Pan option.
2. Press and hold the left mouse button.
3. Move the mouse around while keeping the left mouse button pressed. You will see that the model moves around with the cursor.
4. Release the left mouse button when the view is satisfactory.
5. You can repeat steps 2 – 4, until you are satisfied with the results.
6. To exit the Pan option, use the Escape key, or right-click and select Done.

Tips

• If you have a 3-button mouse (or a mouse wheel) you can quickly pan by pressing and holding the middle button of the mouse, while moving the mouse
• Since the Pan option operates as a "mode", you can use Zoom In , Zoom Out , Zoom All , or Zoom Excavation , without leaving Pan mode. This is a useful shortcut for manipulating the view
• The arrow keys (up / down / left / right) can also be used to pan

Pan is available in:

• The View menu
• The Zoom toolbar
• The default right-click menu