Rocscience acquires 3GSM. Read more

Search Results

Add Single Piles or Forepoles

Piles/Forepoles can be added as individual (single) piles or pile patterns to selected faces or edges of external volume pieces.

To add Piles/Forepoles as individual piles to a selected face:

  1. Select the Support Support workflow tab workflow tab.
  2. Select Faces Selection Faces Selection icon as the Selection Mode.
  3. Select the face on which to add the pile(s).
  4. Select Add Piles or Forepoles Add Piles or Forepoles button from the toolbar or the Piles & Forepoles Piles & Forepoles icon sub-menu of the Support menu.
  5. TIP: with the face selected, you can also right-click on the viewing screen and select Add Piles or Forepoles from the Support sub-menu.

  6. You will see the Add Piles/Forepoles dialog. In this dialog:
    • select the Pile/Forepole Property type.
    • select the pile/forepole Orientation (e.g. Normal, Trend & Plunge, or Vector).
    • select the pile/forepole Direction, by specifying the Axis and Imin Direction.
    • enter the Length of the pile/forepole.
    • in a multi-stage mode, the Staging options allow you to specify the stage at which the piles(s)/forepole(s) will be installed and the stage at which the pile(s)/forepole(s) will be removed. In addition, it can be selected to automatically remove pile(s)/forepole(s) in excavated material using the available option.
    • select Application = Single Pile.
    • select the method to use in specifying the Pile Head Location.

NOTE: the Pile Head Location must be on the selected geometry (i.e. face or edge).

See below for details about the property, orientation, direction, length, staging, application, and pile head location.

  1. If Pile Head Location was selected as X,Y,Z in the previous step, enter the XYZ coordinates of the pile head and select Add. If Freehand is selected, use the view window and left click on the mouse to place the pile/forepole. With Freehand selected, the left click of the mouse effectively completes the placement and add operation. You may repeat this action for each pile/forepole.
  2. When all piles/forepoles have been added to the selected face, select Done to complete and close the dialog.

To apply a single Pile/Forepole to an edge repeat the Steps 1 to 7, but use Edges Selection Edges Selection icon to select the edge(s) on which to add the pile.

Pile/Forepole Property

You can select a Pile/Forepole Property type in the Add Piles/Forepoles dialog. If you wish to edit the pile/forepole properties you can use the Edit Pile Property Edit Pile Property icon shortcut button beside the Pile property type list.

Pile/Forepole Orientation

The Orientation may be specified using one of the following options:

  • Normal - piles/forepoles are applied normal to the boundaries
  • Trend/Plunge - specify a trend and plunge
  • Vector (x,y,z) - specify a vector from the x, y, and z-directions

Flip Orientation

NOTE: after adding a pile/forepole, the orientation may sometimes be opposite from the intended direction (i.e. 180 degrees off). If this occurs, you can select the pile and use the Properties pane option to "flip" (i.e. reverse) the load orientation by 180 degrees.

Pile/Forepole Direction

Remember that in RS3 a pile is simulated as a Beam, with additional properties to account for the pile/soil interface behaviour. In order to define how beams/piles are installed on a boundary with respect to the beam cross-section, you must choose a beam Axis and Imin Direction.

AXIS

You may choose either the Imin Axis or the Imax Axis of the beam cross-section to represent the beam cross-sectional axis.

NOTE: the actual values of Imin and Imax are entered in the Define Beam Properties dialog.

IMIN / IMAX DIRECTION

You must then choose a direction for the chosen beam axis. The following options are available:

  • Normal
  • Trend & Plunge
  • Vector

Pile/Forepole Length

The length of all piles/forepoles as measured along the axis of the pile/forepole.

Staging

If your model is staged, you can specify the installation and removal stage of piles/forepoles.

  • Install at stage - by default the installation stage will be set to the stage that you are currently viewing (i.e. the currently selected stage tab). You can enter a different stage if necessary.
  • Remove at stage - by default the removal stage will be set to never. You can enter the stage at which the piles/forepoles are to be removed (uninstalled), if applicable.

AUTO-REMOVE IN EXCAVATED MATERIAL

The piles/forepoles can be automatically removed in excavated materials if the Auto-remove in excavated material checkbox is selected.

Pile/Forepole Application and Pile Head Location

In RS3, Piles/Forepoles can be added as Single Pile or Pile Pattern. The Single Pile option allows the user to select the geometry on which the piles/forepoles are to be added and define the Pile Head Location by one of the following options:

  • X,Y,Z - enter the XYZ coordinates of the pile head to be added. This option requires the use of the Add Add button button after each pile/forepole head location is entered in order to add the pile/forepole to the model.
  • Freehand - use the view window and left click on the mouse to place the pile/forepole. With this option selected, the left click of the mouse effectively completes the placement and adds the pile/forepole to the model.

NOTE: the Pile Head Location must be on the selected geometry (i.e. face or edge).

Rocscience logo, click here to return to the homepage Portal Account Portal Account Log In Log Out Home Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" Previous Next PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's X page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Click here to visit Rocscience's Reddit page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users RSLog RocFall3 CPillar Dips EX3 RocFall RocPlane RocSlope RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge RocTunnel Commercial License Education License Trial License Shop safe & secure Money-back guarantee