Rocscience acquires 3GSM. Read more

Search Results

Snap

The Snap options in Slide2 allow you to quickly and easily "snap" exactly to any point or line segment in the view.

In the Slide2 Interpret program, snapping is applicable when using the Drawing Tools options, and other options as well (for example, adding material queries after a groundwater analysis).

If you select the Snap option in the View menu, you will see the following options in the Snap dialog:

  • Snap
  • Ortho Snap (Ortho)
  • Object Snap (OSnap)

These options can be enabled by selecting the appropriate checkbox in the Snap dialog. They can also be toggled on or off by using the indicated function keys, or by clicking on the desired option in the Status Bar. The Snap options in Slide2 operate as described below.

Snap

If the Snap option is selected, this allows the user to snap exactly to:

  1. Any vertex of any model or drawing entity (Vertex Snap).
  2. If you hover the mouse over any vertex, the cursor will change to a circle, indicating that you may snap exactly to the vertex location. Note that this includes vertices of all modelling entities (e.g. boundaries, support, search objects etc), and also all vertices of any drawing tools which have been added to a view.

  3. Any line segment of any model or drawing entity (Line Snap).
  4. When the cursor is hovered over any line segment in the view, the cursor will change to an X. If you click the mouse when the X is displayed, the point will be snapped exactly to the line segment. Note that this includes line segments defining all modelling entities (e.g. boundaries, support, search objects etc), and also all line segments of any drawing tools which have been added to a view.

  5. Any grid point (if the grid is displayed) (Grid Snap).
  6. If the Grid is displayed, you can snap exactly to grid points when the mouse is hovered over a grid point. The cursor will change to a small circle when placed over a grid point, to indicate that you may snap to the grid point.

  7. Any extension line displayed by the OSnap option (see below for details).

Ortho Snap

The Ortho Snap option allows the user to snap exactly to the horizontal or vertical directions.

If the line you are currently drawing is nearly horizontal or nearly vertical, a small "right-angle" (i.e. "orthogonal") symbol will be displayed beside the cursor, and the line will snap exactly to the horizontal or vertical direction. This indicates that you can snap the line exactly along a horizontal or vertical direction.

TIP: the Ortho Snap option can be useful in conjunction with Line Snap, since it allows you to simultaneously draw an exactly horizontal or vertical line, and also snap the point exactly to a line segment.

Object Snap (OSnap)

The Object Snap option (OSnap) allows the user to create temporary extension lines which are aligned with vertices or line segments. If the Snap option is also enabled, these extension lines can be snapped to, in the same manner as described above for the Line Snap. To use Object Snap:

  • Select OSnap from the status bar, the Snap dialog, or use the F3 function key.
  • While in this mode:
    • If you place the cursor over any vertex of any modelling entity or drawing tool, red dotted "extension lines" will be automatically drawn from the vertex, in the horizontal and vertical directions.
    • If you place the cursor over any line segment of any modelling entity or drawing tool, a red dotted extension line will automatically be drawn, extending from the line segment, in both directions.
  • While these red dotted lines are displayed on the screen, you may snap exactly to these extension lines, if the Snap option is also enabled, as described above for the Line Snap.
  • These extension lines can be useful as guides for adding queries or drawing tools to the screen. Note that these lines disappear when the current action is completed, they do not remain on the model.

    Toggling the Snap Options

    There are numerous ways of toggling the SNAP options:

    • Select the Snap option in the View menu, to display the Snap dialog.
    • Click the left mouse button on the SNAP, ORTHO or OSNAP options on the status bar.
    • While using any of the Drawing Tools options, or the Add Query option, a right-click will bring up a context menu with the Snap options.
    • The F9 function key will toggle the SNAP option.
    • The F8 function key will toggle the ORTHO option.
    • The F3 function key will toggle the OSNAP option.
    • If you right-click the mouse on the SNAP, ORTHO or OSNAP options on the status bar, this will display the Snap dialog.


    Rocscience logo, click here to return to the homepage Portal Account Portal Account Log In Log Out Home Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" Previous Next PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's X page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Click here to visit Rocscience's Reddit page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users RSLog RocFall3 CPillar Dips EX3 RocFall RocPlane RocSlope RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge RocTunnel Commercial License Education License Trial License Shop safe & secure Money-back guarantee