Zone Capacity Tables

After Zones are defined, run Compute to calculate the set of the pile capacity results.

To show the Zone Capacity Tables:

1. Select Zone Capacity Tables from the Results tab or right-click menu.
2. The Pile Capacity Table view will open showing the selected Zone's capacity graphs on the top half and the table on the bottom half.

Zone Selection

The Zone initially selected when generating the Zone Capacity Tables will be shown. To toggle results for other Zones, select the Zone from the dropdown in the toolbar.

Results Customization Options

Pile Selection

By default, all piles in the selected Zone are shown in the graphs and the table. To toggle the display of pile results within the Zone, use the checkboxes under the Chart Controls pane in the Sidebar.

See the Results Customization Options topic for more information.

Chart Output

The following data types are available to plot, relative to the Pile Tip Elevation:

• Ultimate Skin Friction Capacity
• Ultimate End Bearing Capacity
• Ultimate Total Capacity
• Unit Skin Friction
• Unit End Bearing
• Allowable Capacity, FS1 (if Total Capacity is selected in Project Settings)
• Allowable Capacity, FS2 (if Skin Friction is selected in Project Settings)
• Allowable Capacity, FS3 and FS4 (if Skin Friction / End Bearing is selected in Project Settings)

By default, only Ultimate Skin Friction Capacity, Ultimate End Bearing Capacity, and Ultimate Total Capacity graphs are shown.

To add or modify chart output data:

1. Select Edit Charts from the Chart tab.
2. In the Edit Charts dialog, you can change the data type, add, delete, or reorder the charts data.
3. Select OK to close the dialog and see the changes.

Table Output

The following data types are available in table columns:

• Ultimate Skin Friction Capacity
• Ultimate End Bearing Capacity
• Ultimate Total Capacity
• Unit Skin Friction
• Unit End Bearing
• Allowable Capacity, FS1 (if Total Capacity is selected in Project Settings)
• Allowable Capacity, FS2 (if Skin Friction is selected in Project Settings)
• Allowable Capacity, FS3 and FS4 (if Skin Friction / End Bearing is selected in Project Settings)

By default, only Ultimate Skin Friction Capacity, Ultimate End Bearing Capacity, and Ultimate Total Capacity graphs are shown. If any Factors of Safety for calculating allowable capacities is selected in Project Settings, the associated Allowable Capacities are also shown.

To add or modify table output data:

1. Select Edit Table Columns from the Chart tab.
2. In the Edit Table Columns dialog, you can change the columns on display, or reorder the column data.
3. Select OK to close the dialog and see the changes.

The capacity data for each Zone is grouped by pile and all piles share the same Pile Tip Elevation starting from the Cut-off Elevation for the Zone and incrementing by the same Pile Depth Increment. Not all piles in the Zone may have the same number of data rows since they may be different lengths.

Export To Excel

To export selected (i.e., shown) graph data to Excel:

1. Select Export Data to Excel from the Chart tab.
2. An Excel file will open containing only graphs and data for the currently selected data types, for all Zones. Data for each Zone is shown in a separate Excel sheet.

To export all valid graph data to Excel:

1. Select Export Data to Excel > Export All Data to Excel from the Chart tab.
2. An Excel file will open containing graphs and data for all valid data types, for all Zones. Data for each Zone is shown in a separate Excel sheet.