Bolt Results Overview

If bolts are applied to your model, and Compute Kinematics has been run, then bolt results can be displayed using these steps:

1. Select the Results workflow tab
2. Select the Results node in the Visibility Tree, and set Block Type = Unit Blocks to display bolt results for unit blocks or Block Type = Combined Blocks to display bolt results for combined blocks. Bolt results are not available when Block Type = Unit and Combined Blocks.
3. Select the Interpret menu. Two options pertaining to bolt results will be available under the Interpret menu:
• Show Intersecting Bolts
• Show Bolt Block Forces
• Show Bolt Force Diagram