Edit or Delete Measured Joints

Measured Joints in RocSlope3 can be edited and deleted in a few different ways.

Editing Measured Joints

To edit the Measured Joint collection:

1. Select the Measured Joints node from the Visibility Tree.
2. In the Properties pane:
   • Click the Edit button beside the Applied Property to bring up the Define Measured Joints dialog for editing.
   • Change the Transparency of the measured joints using the slider, edit, or spin control. By default, Transparency = 0%.
     

OR:

1. Select Joints > Define Measured Joints to bring up the Define Measured Joints dialog for editing.

To edit a single selected Measured Joint:

1. Ensure that the Selection Mode is set to Entity Selection (View > Selection Mode > Entity Selection).
2. Click on a Measured Joint to select it from the 3D CAD View.
3. Right-click and select Edit Measured Joint to bring up the Define Measured Joints dialog for editing. The selected joint's corresponding row is highlighted.

To assign a Joint Property to selected Measured Joints:

1. Click on a Measured Joint to select it from the 3D CAD View.
2. Right-click and select Assign Joint Property to Selected Joints
3. In the Assign Joint Property dialog:
   • Select the Joint Property.
   • Click OK to assign the joint property to all selected measured joints.

Deleting Measured Joints

To delete the Measured Joint collection:

1. Select Measured Joints node from the Visibility Tree.
2. Click Delete button from the node entry in the Visibility Tree.

To delete selected Measured Joints:

1. Click on a Measured Joint to select it from the 3D CAD View.
2. Right-click and select Delete Selected Measured Joints to delete the selected joints.