References

Barton, N.R. (1973). Review of a new shear strength criterion for rock joints. Engng Geol. 7, 287-332.

Barton, N.R. (1976). The shear strength of rock and rock joints. Int. J. Mech. Min. Sci. & Geomech. Abstr. 13(10), 1-24.

Barton, N.R. and Bandis, S.C. (1990). Review of predictive capabilities of JRC-JCS model in engineering practice. In Rock joints, proc. int. symp. on rock joints, Loen, Norway, (eds N. Barton and O. Stephansson), 603-610. Rotterdam: Balkema.

Barton, N.R. and Choubey, V. (1977). The shear strength of rock joints in theory and practice. Rock Mech. 10(1-2), 1-54.

Butler, R.F. (1992). Paleomagnetism: magnetic domains to geologic terranes (Chapter 6), Blackwell Science.

Carvalho, J.L. (2002). Slope Stability Analysis for Open Pits. Golder Associates Ltd., Mississauga, Canada.

Duncan, J.M. (2000). Factors of safety and reliability in geotechnical engineering. J. Geotechnical & Geoenvironmental Engineering, April, pp. 307-316.

Evans, M., Hastings, N. and Peacock, B. (1993). Statistical Distributions, 2nd edition, John Wiley & Sons, Inc., New York.

Fisher, R. (1953). Dispersion on a sphere. Proc. Royal Society London, A217, pp. 295-305.

Gibson W.H., de Bruyn I.A., Walker D.J.H. (2006) Considerations in the optimization of bench face angle and berm width geometries for open pit mines, Proc. South African Institute of Mining and Metallurgy (SAIMM) Int Symp on Stability of Rock Slopes in Open Pit Mining and Civil Eng, 557-578.

Goodman, R.E. and Shi, G. (1985). Block Theory and Its Application to Rock Engineering, Prentice-Hall Inc., New York.

Haldar, A. and Mahadevan, S. (2000). Probability, Reliability, and Statistical Methods in Engineering Design, John Wiley & Sons, Inc., New York.

Hoek, E. and Bray, J.W. (1981). Rock Slope Engineering, Revised 3rd edition, The Institution of Mining and Metallurgy, London, pp 341 - 351.

Hoek, E., Kaiser, P.K. and Bawden, W.F. (1995). Support of Underground Excavations in Hard Rock, A.A.Balkema, Rotterdam, Brookfield.

Iman, R.L., Davenport, J.M. and Zeigler, D.K. (1980). Latin Hypercube Sampling (a program user’s guide). Technical Report SAND 79-1473. Albuquerque, NM: Sandia Laboratories.

Langford, J.C, Corkum, B., Curran, J.H. (2014). Preliminary selection of optimum bench face angle using uniformly distributed wedges. International Discrete Fraction Network Engineering Conference, DFNE 2014 - 260. Vancouver, Canada.

Law, A.M. and Kelton, D.W. (1991). Simulation Modeling and Analysis, 2nd edition, McGraw-Hill, Inc., New York.

Meyers, A.G. and Priest S.D. (2000). Generating discontinuity orientation data for use in probabilistic models for modelling excavations in rock. In Proceedings Geo Eng 2000, November 2000.

Miller, S.M. (1988). Modeling Shear Strength at Low Normal Stresses for Enhanced Rock Slope Engineering, Proc. Of 39th Highway Geology Symp., 346-356.

Miller, S.M., Girard, J.M., and McHugh, E. (2000). Computer modeling of catch benches to mitigate rockfall hazards in open pit mines. Pacific Rocks 2000, Balkema, Rotterdam, pp. 539-545.

Saucier, Richard (2000). Computer Generation of Statistical Distributions. Army Research Laboratory, paper ARL-TR-2168.

Startzman, R.A. and Wattenbarger, R.A. (1985). An improved computation procedure for risk analysis problems with unusual probability functions. Proc. symp. Soc. Petrolm Engnrs, hydrocarbon economics and evaluation, Dallas.