References

Beer, G. and Meek, J.L. (1982) Design curves for roofs and hanging-walls in bedded rock based on "voussoir" beam and plate solutions. Trans. Instn. Min. Metall. 91, pp A18-A22.

Brady, B.H.G. and Brown, E.T. (1993) Rock Mechanics for Underground Mining (Second Edition) (Chapter 8), London: Allen and Unwin, 571 pages.

Carter, T.G. (2014). Guidelines for use of the Scaled Span Method for Surface Crown Pillar Stability Assessment. Proc. 1st International Conference on Applied Empirical Design Methods in Mining, Lima-Perú, 9-11th June, 34pp

Carter, T.G., Cottrell, B. E., Carvalho, J.L. and Steed, C.M. (2008) Logistic Regression improvements to the Scaled Span Method for dimensioning Surface Crown Pillars over Civil or Mining Openings. Proc. 42nd US Rock Mechanics Symposium and 2nd Can-US Rock Symp. San Francisco. Paper 08-282 10pp

Duncan, J.M. (2000). Factors of safety and reliability in geotechnical engineering. J. Geotechnical & Geoenvironmental Engineering, April, pp. 307-316.

Evans, W.H. (1941) The strength of undermined strata. Trans. Instn. Min. Metall., 50, 475-532.

Hoek, E. (1989) A Limit Equilibrium Analysis of Surface Crown Pillar Stability. Proc. Int. Conf. on Surface Crown Pillars Active & Abandoned Metal Mines Timmins, pp. 3-13.

Hoek, E. (1992) Lessons from Case Histories in Rock Engineering. Course notes, Dept. of Civil Engineering, University of Toronto, Toronto, Ontario, Canada, pp 71-79.

Hoek, E. and Brown, E.T. (1988) The Hoek-Brown Failure Criterion - a 1988 Update. 15th Canadian Rock Mechanics Symposium, pp 31-38.

Hutchinson, D.J. and Diederichs, M. (1996). Cablebolting in Underground Mines, Vancouver: Bitech. 400 pages.

Law, A.M. and Kelton, D.W. (1991). Simulation Modeling and Analysis, 2nd edition, McGraw-Hill, Inc., New York.

Rosenbleuth, E. (1972) Point estimates for probability moments. Proc. Nat. Acad. Sci. 10, pp 3812-3814.

Timoshenko, S. and Woinowsky-Kreiger, S. (1987). Theory of Plates and Shells (2nd ed.). McGraw-Hill Book Company, Inc.