RSPile

RSPile

3D Pile Analysis
Free Trial
RSPile

Lateral & Axial Pile Analysis

Carry out lateral & axial analyses of various piles with the flexibility to design piles with multiple sections and model complex soil strata using boreholes.

RSPile
RSPile

Lateral & Axial Pile Analysis

Carry out lateral & axial analyses of various piles with the flexibility to design piles with multiple sections and model complex soil strata using boreholes.

RSPile

Capacity Pile Analysis

Analyze Load and Bearing Capacity of both Driven and Bored piles. Driven pile analysis methods are based on Federal Highway software “Driven.” Bored pile analysis with several methods available for cohesionless soils, cohesive soils, and weak rock.

RSPile

Capacity Pile Analysis

Analyze Load and Bearing Capacity of both Driven and Bored piles. Driven pile analysis methods are based on Federal Highway software “Driven.” Bored pile analysis with several methods available for cohesionless soils, cohesive soils, and weak rock.

Grouped Pile Analysis

Analyze a group of piles connected by a cap. Design complex models of pile groups where each pile can be a different pile type, consisting of multiple sections.

RSPile
RSPile

Grouped Pile Analysis

Analyze a group of piles connected by a cap. Design complex models of pile groups where each pile can be a different pile type, consisting of multiple sections.

Price List

See all features in RSPile

Check out the full list of technical features in RSPile.

See Full Specs
Spec List Spec List
RSPile across Applications
  • Foundation Design
  • Slope Support

Model pile foundations and analyze their response under various loads.

Article: Bored Pile Analysis
Foundation Design using RSPile

Design pile supports, which can then be used in Slide2 to investigate their effects on the stability of rock slopes or soil slopes.

Article: Integration with Slide2
Slope Support using RSPile
RSPile seamlessly integrates with
RSPile
RSPile

Import RSPile files into Slide2 for adding comprehensive support capabilities into your slope stability analyses, making the whole process of integrating piles more efficient. Model various pile designs in RSPile and analyze their responses under various loads before using them in your Slide2 models.

The integration between Slide3 and RSPile allows you to use piles created in RSPile and then add them into Slide3 as a Support Type. You can also perform pre-analysis of piles straight from the Slide3 interface.

RSPile

Import RSPile files into Slide2 for adding comprehensive support capabilities into your slope stability analyses, making the whole process of integrating piles more efficient. Model various pile designs in RSPile and analyze their responses under various loads before using them in your Slide2 models.

RSPile

The integration between Slide3 and RSPile allows you to use piles created in RSPile and then add them into Slide3 as a Support Type. You can also perform pre-analysis of piles straight from the Slide3 interface.

Explore the latest features in RSPile
  • New Pile Capacity Table Generator

    Calculate pile capacities at different locations for different types of piles automatically and generate the results into a table and a series of graphs. This feature not only provides you with the ultimate skin friction and ultimate tip resistance but helps apply different factors of safety to determine the allowable carrying capacity of the piles.

  • New Tapered Piles

    Raymond and Monotube piles are back in Driven Analysis with the additional tapered sections. Calculate the driven capacities of tapered piles with the flexibility of making any cross-sections tapered in the Pile type Editor, except for the H-Pile.

  • Interaction Diagram

    RSPile's new functionality helps you plot interaction diagrams for your reinforced concrete sections and see their structural capacity in a single click. Seamlessly plot the nominal axial load capacity P against the nominal bending moment M for a given angle of load application and generate the maximum moments Mnx'-Mny' for a given load.

New Pile Capacity Table Generator in RSPile
New Tapered Piles in RSPile
Interaction Diagram in RSPile
New Pile Capacity Table Generator in RSPile
New Pile Capacity Table Generator

Calculate pile capacities at different locations for different types of piles automatically and generate the results into a table and a series of graphs. This feature not only provides you with the ultimate skin friction and ultimate tip resistance but helps apply different factors of safety to determine the allowable carrying capacity of the piles.

New Tapered Piles in RSPile
New Tapered Piles

Raymond and Monotube piles are back in Driven Analysis with the additional tapered sections. Calculate the driven capacities of tapered piles with the flexibility of making any cross-sections tapered in the Pile type Editor, except for the H-Pile.

Interaction Diagram in RSPile
Interaction Diagram

RSPile's new functionality helps you plot interaction diagrams for your reinforced concrete sections and see their structural capacity in a single click. Seamlessly plot the nominal axial load capacity P against the nominal bending moment M for a given angle of load application and generate the maximum moments Mnx'-Mny' for a given load.

Learn more about all the new features in the latest release of RSPile. Read related article
Learn more about all the new features in the latest release of RSPile.
Grow with our Learning Resources
Explore our Learning Resources and User Guides, designed to help you excel with all of your geotechnical projects, whether you are a practicing engineer, an academic or a student.
article

New to Settle3 and RSPile: Section Creator, Pile Types and more

article

Continuous Software Means Continuous Innovation: The New Slide3-RSPile Integration

article

New in RSPile: Bored Pile Analysis and Much More

Plans & Pricing

Perpetual

One-time purchase
USD
  • Own the version of your license in perpetuity
  • Maintenance+ subscription included in first year
  • Install on one computer

Lease

Ongoing subscription
USD / year
  • Maintenance+ subscription
  • Ongoing bug fixes
  • Continuous new features
  • Install on one computer
Have questions about our pricing structure? View Plans & Pricing FAQ