RocTunnel3 Maintenance+ Update History

Version 1.005 – April 13 2026 [Download]

1. NEW Snap Imported Bolts to intersect excavation geometry within user specified tolerance
2. NEW Simultaneous bolt snapping for multiple selected imported bolt nodes
3. NEW Advanced project settings to snap bolts to intersect excavation geometry before the kinematics compute stage
4. NEW Cancel block and kinematics compute
5. NEW Contour excavation geometry
6. FIXED Bolt Force Diagram, Intersecting Bolts, and Bolt Block Forces are not cleared when results are cleared
7. FIXED Missing Bolt Force Diagram for first imported bolt
8. FIXED Results are not updated after flipping the bolt orientation in the Properties Pane
9. FIXED Results Set visibility does not update after closing block information
10. FIXED All joint surface properties changing when only one is changed
11. FIXED Rare instance of no blocks being computed when both Search Limits and trimmed joints are applied
12. FIXED Block failure depths now calculated using the cluster socket and not all sockets in the slope
13. FIXED Modeler views not updated after editing Imported Bolts
14. FIXED Edited measured joints out of sync with drawn measured joints
15. FIXED Small volumes create new excavations under specific conditions
16. FIXED Rare case of not being able to import a DIPS file in Synthetic Joints dialog
17. FIXED Rare case of a bolt force not being applied to the correct block
18. FIXED Crash on changing property of imported bolts
19. FIXED Crash on changing the Design Factor of Safety when options for Block Contour and Successive Failure are active
20. FIXED Crash when opening Display Options before Compute Kinematics
21. FIXED Crash when segmenting sweep geometry
22. CHANGED Added Edit Joint Properties Button to Define Synthetic Joint Properties dialog
23. CHANGED Disabled View Detailed Block Information if kinematics are not computed
24. CHANGED Added Joint Name and Joint ID in Detailed Block Information (to help identify the joints forming the block faces)

Version 1.004 – February 9 2026 [Download]

1. NEW Dips9 integration – direct import of measured and synthetic joints (.dipsresults)

Version 1.003 - June 2 2025 [Download]

1. FIXED Global offset in measured and synthetic joints on file reopening
2. FIXED Offset in synthetic joints after Divide All

Version 1.002 - January 28 2025 [Download]

1. NEW RSInsight access from Help menu

Version 1.001 - June 25 2024 [Download]

1. Commercial Release