The Connected Rock Engineer: Integrated Rocscience Workflows for Surface and Underground Excavations
Following the South Africa User Group Meet on February 2, 2027, Rocscience will offer a two-day intensive technical workshop focused on connecting geological data, structural analysis, stability assessment, and numerical modelling across the Rocscience software ecosystem.
Participants will follow an open-pit wall and an underground decline through a continuous workflow, learning how to transfer geometry, structural measurements, and material properties between programs without repeated manual data entry. Through practical exercises, they will explore how to improve data consistency, reduce model setup time, and maintain traceability throughout the engineering process.
The workshop will cover photogrammetric rock-face mapping, geological data management, structural and strength analysis, surface and underground stability assessment, and 3D numerical modelling. With approximately 60% hands-on exercises and 40% lecture and discussion, participants will develop a repeatable workflow for more efficient and defensible engineering assessments.
Event Details
- Dates: Wednesday, February 3 – Thursday, February 4, 2027
- Location: The Maslow Hotel Sandton (Rivonia Rd, Grayston Dr, Gauteng, Sandton, 2146)
- Software: ShapeMetriX, RSLog, Dips, RSData, RocSlope2, RocSlope3, Slide3, RS3, RS2, RocTunnel3
Registration Fees
- Early Bird: USD $800 (until December 31, 2026)
- Regular: USD $1,000
What’s included:
- Temporary software licenses for the course
- Pre-course reading materials and file-format guide
- Hands-on exercises using prepared open-pit and underground case studies
- Documented end-to-end workflow template, including a checklist and project folder structure
- QA and traceability checklist
- Certificate of completion
Please note:
- Participants are responsible for their own travel and accommodation.
- Participants must bring their own laptops.
- Laptops must meet the system requirements for RS3, RocSlope3, and ShapeMetriX.
- Course software licenses will be arranged in advance.
- Participants are expected to complete the pre-course software installation and assigned reading before the workshop.
- A pre-installation session the evening before Day 1 is strongly recommended.
- Working knowledge of rock mechanics fundamentals, including Hoek-Brown, kinematic analysis, and limit equilibrium, is recommended.
- Prior experience with a Rocscience program is helpful but not required.
- Seats are limited.
Course Outline
Day 1 — Capture, Organize, Interpret, Characterize
- ShapeMetriX: Create a 3D model of a pit wall from imagery; map joints, trace lengths, and lithology partitions; export structural data and geometry.
- RSLog: Organize borehole, discontinuity, and laboratory data; build a design cross-section; review data quality and approval workflows.
- Dips: Combine structural measurements from ShapeMetriX and RSLog; define joint sets; perform kinematic and sensitivity analyses for pit sectors and tunnel orientations.
- RSData: Fit Hoek-Brown strength envelopes using triaxial and UCS data; derive equivalent Mohr-Coulomb parameters for the design stress range.
- RocSlope2: Perform bench-scale planar, wedge, and toppling analyses using probabilistic inputs; assess bench face angles and berm widths by sector.
Day 2 — Block Stability, Numerical Modelling, and the Hand-off Audit
- RocSlope3: Import 3D wall geometry and measured joints; identify removable blocks; assess stability and hazards; perform sensitivity analyses for persistence, water, and friction.
- RocTunnel3: Apply the structural dataset and rock mass parameters to assess underground wedge stability and support along a decline; explore sensitivity to drive orientation and joint friction. Unwedge will also be demonstrated.
- Slide3: Build an inter-ramp or overall slope model using the same geometry; perform 3D limit equilibrium analysis.
- RS3: Convert the Slide3 model for shear strength reduction analysis; explore staged excavation, groundwater conditions, and DFN-based joint networks.
- RS2: Export critical 2D sections using the Section Creator; refine meshes and explore support design and sensitivity analyses.
- Hand-off Audit: Exchange project folders with other participants, trace design parameters back to their source data, and continue the workflow using another team's project.
Course Instructor

Contact
For questions or workshop registration please contact at andrew.ioannou@rocscience.com
Feb 3, 2027 - Feb 4, 2027
Johannesburg, South Africa
The course will be conducted in English
- Early Bird: USD $800
(until Dec 31, 2026) - Regular: USD $1000