course

Beyond Conventional Analysis: Smarter Geotechnical Modelling with Rocscience

Two-Day Technical Workshop | Slide2, RS2, AI & Advanced Geotechnical Workflows

Course Information

Date: February 16–17, 2027
Venue: Corinthia London (Whitehall Place, SW1A 2BD, London)
Language: English
Software: Slide2, RS2, RSInsight, with introductions to Slide3 and RS3

Registration Fee

  • Early Bird: USD $1,250 (until December 31, 2026)
  • Regular: USD $1,500

What's Included

  • Two days of instructor-led technical training.
  • Hands-on exercises and practical case studies.
  • Temporary Rocscience software licenses for workshop exercises.
  • Digital course materials.
  • Certificate of participation.
  • Lunch and refreshments.

Course Overview

Join Rocscience in London for a two-day, instructor-led technical workshop exploring modern approaches to geotechnical analysis, with a focus on slope stability and finite element modelling using Slide2 and RS2.

Led by Rocscience Chief Technology Officer Dr. Reginald Hammah, this workshop combines fundamental engineering principles with practical modelling techniques, real-world applications, and emerging technologies shaping the future of geotechnical engineering.

Participants will explore limit equilibrium methods (LEM) and finite element methods (FEM), learning how to develop, analyze, and interpret geotechnical models with greater confidence. The workshop will also introduce AI-assisted engineering workflows and RSInsight, highlighting opportunities to enhance data interpretation, streamline analysis, and support engineering decision-making.

Additional demonstrations using Slide3 and RS3 will illustrate how 3D modelling can complement conventional 2D analysis for more complex geotechnical applications.

What You'll Learn

  • Apply limit equilibrium and finite element methods to practical geotechnical engineering problems.
  • Develop and interpret slope stability models using Slide2.
  • Perform finite element analysis using RS2, including stress, deformation, groundwater, and shear strength reduction analysis.
  • Compare LEM and FEM results to evaluate model assumptions and engineering performance.
  • Explore how AI and RSInsight can support modern geotechnical workflows.
  • Understand when and how to extend 2D analysis into 3D using Slide3 and RS3.
  • Apply engineering judgement and modelling best practices through practical examples and case studies.

Additional Information
 

Participant Requirements

Participants are requested to bring their own laptops for practical exercises. Software installation instructions and recommended system requirements will be shared prior to the workshop.

Accommodation and travel expenses are the responsibility of participants.

UK User Group Meet – February 15, 2027

This technical workshop follows Rocscience's complimentary UK User Group Meet on February 15, 2027, bringing together geotechnical professionals, Rocscience leadership, and industry experts for technical presentations, discussions, and networking opportunities.

More details are available here: United Kingdom User Group Meet - February 2027
 

Course Outline
 

Day 1 – Slope Stability Analysis and Modelling Fundamentals

Module 1: Fundamentals of Geotechnical Stability Analysis

  • Overview of slope stability principles and common failure mechanisms.
  • Introduction to limit equilibrium and finite element methods.
  • Understanding factors of safety, deformation, and strength reduction.
  • Selecting appropriate modelling approaches for different engineering applications.

Module 2: Slope Stability Analysis Using Slide2

  • Model setup, geometry creation, and material property definition.
  • Selection of analysis methods and critical slip surface searches.
  • Groundwater conditions and their influence on slope stability.
  • Sensitivity and probabilistic analysis.
  • Results interpretation and model validation.

Module 3: Practical Applications and Case Studies

  • Application of Slide2 to real-world geotechnical problems.
  • Evaluation of different ground conditions and design scenarios.
  • Common modelling challenges and best practices.
     

Day 2 – Finite Element Analysis and Emerging Technologies

Module 4: Advanced Geotechnical Analysis Using RS2

  • Introduction to finite element modelling principles.
  • Model development, meshing, boundary conditions, and material behaviour.
  • Stress, deformation, and groundwater analysis.
  • Shear strength reduction and slope stability assessment.
  • Comparing RS2 and Slide2 results to support engineering decisions.

Module 5: Smarter Geotechnical Workflows – AI and RSInsight

  • Introduction to AI applications in geotechnical engineering.
  • Overview of RSInsight and its role in engineering data visualization and interpretation.
  • Exploring opportunities to integrate AI-assisted tools into geotechnical modelling workflows.
  • Considerations for model validation, engineering judgement, and responsible use of AI.

Module 6: Beyond 2D – Introduction to Slide3 and RS3

  • Understanding the advantages and limitations of 2D and 3D analysis.
  • Overview of 3D slope stability analysis using Slide3.
  • Introduction to 3D finite element modelling using RS3.
  • Demonstrations highlighting applications where 3D analysis provides additional engineering insight.

Wrap-Up – Q&A and Best Practices

  • Discussion of common modelling challenges.
  • Practical recommendations for selecting analysis methods.
  • Open Q&A with Dr. Reginald Hammah.

Course Instructors

Reginald Hammah, Chief Scientific Officer at Rocscience

 

Contact & Registration

For registration inquiries or general questions, please contact Haneen Aziz at haneen.aziz@rocscience.com.

Location