- #1

- 51

- 0

You are using an out of date browser. It may not display this or other websites correctly.

You should upgrade or use an alternative browser.

You should upgrade or use an alternative browser.

- Thread starter Typhon4ever
- Start date

- #1

- 51

- 0

- #2

Nugatory

Mentor

- 13,608

- 6,854

Either way if you just want the difference- one way tells you how much lower a is than b, and the other way tells you how much higher b is than a. The result will be the same except for their sign.

- #3

- 32,155

- 9,101

Remember that voltage doesn't have any physical meaning, only voltage differences do. So you always have to define your voltages as differences from some "reference" voltage. Your reference voltage is always a. The equation then gives you the voltage at b referenced to a. Note:For the formula for getting voltage difference [itex] V_b-V_a=-\int _a^{b} Edl [/itex] how do we know where the limit a and b go? In the equation it goes from a to b but why not b to a?

[itex]-\int_a^{a} E dl = 0 = V_a-V_a [/itex]

So the voltage of any point referenced to itself is always 0, as you would expect.

Note also:

[itex] V_b-V_a= -\int _a^{b} Edl = -(-\int _b^{a} Edl) = -(V_a-V_b) [/itex]

So the voltage of b referenced to a is the negative of the voltage of a referenced to b, as you would also expect.

- #4

BruceW

Homework Helper

- 3,611

- 121

As DaleSpam says, the voltage at b, referenced to a is conventionally given by Vb - Va

- #5

- 51

- 0

Thanks!

Share: