The Rocscience International Conference 2021 Proceedings are now available. Read Now
 

Search Results

Add Shotcrete Layer

Shotcrete can be applied to the perimeter of the excavation, with the Add Shotcrete Layer option (Perimeter Support view).

NOTE: On the perimeter, you are not limited to a single shotcrete layer. Multiple layers can be added anywhere on the Opening Section boundary. The layers can have different properties, and are allowed to overlap in any manner.

To apply a layer of shotcrete to the perimeter:

  1. First, make sure you are viewing the Perimeter Support Designer view (select the Perimeter Support Designer Support Designer Icon button from the toolbar).
  2. Select the Add Shotcrete Layer On Perimeter Add Layer Icon option from the Sidebar, the Support menu or the right-click menu.
  3. You will see the Add Shotcrete Layer On Perimeter dialog.
    Add Shotcrete Layer on Perimeter Dialog
    This allows you to select the shotcrete property type for the layer you are going to add.
  4. Select the Shotcrete Properties from the drop-list, and select OK.
    NOTE: Shotcrete properties are created and defined with the Shotcrete Properties option.
  5. You will then be prompted to enter the starting and ending points for the shotcrete layer on the perimeter. This can be done graphically with the mouse, or by entering coordinates in the prompt line.
    • Start Point: You will notice a cross-hair icon which appears on the Opening Section boundary, and follows the mouse movement. You can use this cross-hair to graphically locate the starting point of the layer on the perimeter. If the Snap option is toggled, the cross-hair will snap exactly to vertices. Snap can be toggled in the right-click. Click the left mouse button when the cross-hair is at the desired location. Alternatively, you can type in the coordinates of the start point in the prompt line.
    • End Point: As you move the mouse, the shotcrete layer will be drawn on the model, in a counter-clockwise direction from the Start point. The shotcrete layer will appear as a thin strip drawn inside the perimeter. Use the cross-hair cursor to graphically locate the endpoint, or type the coordinates in the prompt line.
  6. When the End Point has been entered, the shotcrete layer will be added to the model.

NOTE: The shotcrete layer is always created in a counter-clockwise direction around the perimeter, from the Start point to the End point. Therefore you must define the start and end points accordingly. If you enter the points in the wrong order, you will have to start over. If this occurs, press ESCAPE to exit the option, or if you have already added an incorrect layer, select Undo.

Multiple Shotcrete Layers

On the perimeter, you are not restricted to only a single shotcrete layer. You may define any number of layers as required, by repeating the above steps. Multiple shotcrete layers can be located anywhere on the perimeter, and the layers are allowed to overlap in any manner. Each layer can have different properties.

Display of Shotcrete Layer

Shotcrete is displayed in the Perimeter Support Design View, as a thin strip drawn inside the perimeter. The colour of a shotcrete layer is the colour of the shotcrete property type you have assigned to the layer.

The shotcrete layer thickness as displayed, does NOT represent the actual thickness of the layer (as defined in Shotcrete Properties). The shotcrete layer thickness (as displayed on the 2d view) is always constant, relative to the dimensions of the Opening Section. If multiple layers are added, all layers are displayed with the same thickness, regardless of the actual thickness of the layers.

On the 3D views (3D Wedge View, Multi Perspective View), shotcrete is displayed on the 3 dimensional excavation by shading the surface of the excavation with the colour of the shotcrete, where the shotcrete has been applied. If multiple layers of shotcrete have been applied, and the layers overlap, the shading which you see in the 3D views, will represent the final layer(s) of shotcrete, as would be visible from within the excavation.

Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee