# Picked Wedges

After a **Probabilistic Analysis **is computed, the Mean Wedges are initially displayed. It is possible to view ANY WEDGE arrangement generated by the Probabilistic Analysis, as described below.

- If you double-click the LEFT mouse button anywhere on a Histogram, Cumulative, or Scatter plot, the nearest corresponding wedge from the plot, will be displayed in the Wedge View. This is referred to as a
**Picked Wedge**.

**NOTE**: Alternatively, you can right-click at any point on a Histogram, Cumulative, or Scatter plot and select **Show Wedge**, which will display the **Picked Wedge** in the Wedge View.

- When you select a
**Picked Wedge**, the**Sidebar**and all views of the current document will be updated to display the results for the**Picked Wedge**. For example, the**Info Viewer**will be updated to display the results for the selected wedge.

Example:

- Generate a Factor of Safety Histogram.
- Double-click on the Histogram at any desired Factor of Safety (for example, Factor of Safety = 1).
- Now look at the
**3D Wedge View**. A new wedge arrangement will be displayed, corresponding to the point (along the X-axis of the Histogram) at which you clicked. This is an actual wedge arrangement generated by the Probabilistic Analysis. - Look at the
**Sidebar**or the**Info Viewer**. The wedge data corresponds to the "Picked" wedge you are viewing. - This example applies to Histograms or Scatter plots of any
**Data Type**(i.e., Wedge Weight, Input Data variables, etc.), not just Factor of Safety plots.

This feature is meant to give you a general idea of the shape and orientation of wedges corresponding to locations on a Histogram or Scatter plot. For example, on a Factor of Safety Histogram, you will probably want to double-click in the "red" Factor of Safety region, to see the wedges with a Factor of Safety < 1.

**TIP:** Use the Tile options in the Windows menu to tile views, so that you can immediately see the picked wedge data displayed when you double-click on a Histogram or Scatter plot.

## Resetting the Mean Wedge

To reset the Wedge View so that the mean wedge is displayed, select **Show Mean** Wedges from the View menu. This will re-display the wedges corresponding to the mean Probabilistic Input Data. All other views will also be reset to display the mean wedge data (e.g., **Info Viewer**).