The Rocscience International Conference 2021 Proceedings are now available. Read Now
 

Search Results

References

General

Pande, G.N., Beer, G., & Williams, J.R., (1990), "Numerical Methods in Rock Mechanics", John Wiley and Sons, Ltd.

Groundwater

Brooks, R. and Corey, A. (1964). "Hydraulic properties of porous media." Hydrology Paper No. 3, Colorado State University.

Fredlund, D.G. and Rahardjo, H. (1993). "Soil Mechanics for Unsaturated Soils." John Wiley, New York.

Fredlund, D.G. and Xing, A. (1994). "Equations for the soil-water characteristic curve." Canadian Geotechnical Journal 31, 521-532.

Fredlund, D. G. (2000). "The 1999 R.M. Hardy Lecture: The implementation of unsaturated soil mechanics into geotechnical engineering." Can. Geotech. J. 37: 963–986.

Gardner, W. (1956). "Mathematics of isothermal water conduction in unsaturated soils." Highway Research Board Special Report 40 International Symposium on Physico-Chemical Phenomenon in Soils, Washington D.C. pp. 78-87.

van Genuchten, M. Th. (1980). "A closed form equation for predicting the hydraulic conductivity of unsaturated soils." Soil Science Society of America Journal 44, 892-898.

Material Properties

Duncan, J.M. and Chang, C.Y. (1970). Nonlinear analysis of stress and strain in soils. J. of Soil Mech. and Foundation Division, ASCE, 96 (SM5), pp.1629-1653.

Wong, K.S. and Broms, B.B. (1994). Analysis of retaining walls using the Hyperbolic Model. Soil-structure interaction numerical analysis and modeling, Ed. John W. Bull, E. and FN. SPON, London, UK, pp. 605-645.

Hoek, E. and Bray, J.W. (1981). Rock Slope Engineering, Revised 3rd edition, The Institution of Mining and Metallurgy, London.

Hoek, E., Carranza-Torres, C. and Corkum, B. (2002). Hoek-Brown Failure Criterion – 2002 Edition. 5th North American Rock Mechanics Symposium and 17th Tunneling Association of Canada Conference: NARMS-TAC, 2002, pp. 267-271.

Hoek, E. and Diederichs, M.S. (2006). Empirical estimation of rock mass modulus. International Journal of Rock Mechanics and Mining Sciences, 43, 203–215.

Strength Models

Barton, N.R. and Choubey, V. (1977). The shear strength of rock joints in theory and practice. Rock Mech. 10(1-2), 1-54.

Esterhuizen, J., Filz, G.M. and Duncan, J.M. (2001). Constitutive Behaviour of Geosynthetic Interfaces, Journal of GeoTechnical and Geoenvironmental Engineering, October 2001, pp 834-840.

Hoek, E. and Bray, J.W. (1981). Rock Slope Engineering, Revised 3rd edition, The Institution of Mining and Metallurgy, London.

Hoek, E., Carranza-Torres, C. and Corkum, B. (2002). "Hoek-Brown Failure Criterion – 2002 Edition", NARMS 2002.

Ladd, C.C. and Foote, R. (1974). A new design procedure for stability of soft clays. Journal of the Geotechnical Engineering Division. ASCE, Vol. 100, No. GT7. pp. 763-786.

Miller, S.M. (1988). Modeling Shear Strength at Low Normal Stresses for Enhanced Rock Slope Engineering. Proc. Of 39th Highway Geology Symp, 346-356.

Joints

Azami A., Yacoub T. & Curran J. (2012). Effects of strength anisotropy on the stability of slopes. 65th Canadian Geotechnical Conference, CGS Geo-Manitoba, Winnipeg, Manitoba, Canada.

Barton, N.R. (1972). A model study of rock-joint deformation, Int. J. Rock Mech. Min. Sci., Vol. 9, 579-602.

Barton, N.R. (1973). Review of a new shear strength criterion for rock joints. Engng Geol. 7, 287-332.

Barton, N.R. (1976). The shear strength of rock and rock joints. Int. J. Mech. Min. Sci. & Geomech. Abstr. 13(10), 1-24.

Barton, N.R. and Bandis, S.C. (1990). Review of predictive capabilities of JRC-JCS model in engineering practice. In Rock joints, proc. int. symp. on rock joints, Loen, Norway, (eds N. Barton and O. Stephansson), 603-610. Rotterdam: Balkema.

Barton, N.R. and Choubey, V. (1977). The shear strength of rock joints in theory and practice. Rock Mech. 10(1-2), 1-54.

Dershowitz, W. (1985). Rock Joint Systems. Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA.

Pande, G.N., Beer, G. and Williams, J.R. (1990). Numerical Methods in Rock Mechanics, John Wiley and Sons Ltd.

Zienkiewicz, O.C. & Pande G.N. (1977). Time-dependent multilaminate model of rocks-A numerical study of deformation and failure of rock masses, International Journal for Numerical and Analytical Methods in Geomechanics, 1(3): 219–247.

Plain Strand Cable bolt model

Moosavi, M. (1997). "Load distribution along fully grouted cable bolts based on constitutive models obtained from modified Hoek cells". Ph.D. Thesis, Queen's University, Kingston, Ontario, Canada.

Moosavi, M. , Bawden, W.F. and Hyett, A.J. (1996). "A comprehensive laboratory test programme to study the behaviour of modified geometry cable bolt support", Rock mechanics, tools and technics, Proceedings of the 2nd North American Rock Mechanics Symposium, Montreal.

Hyett, A.J., Moosavi, M and Bawden, W.F. (1996). "Load distribution along fully grouted bolts, with emphasis on cable reinforcement", Int. J. of Num. & Anal. Meth. in Geomech. Vol 20, pp 517-544.

Hyett, A.J, Bawden, W.F., MacSporran, G.R., and Moosavi M. (1995). "A constitutive law for bond failure of fully grouted cable bolts using a modified Hoek cell", Intl. J. Rock Mech. and Mining Sci. & Geomechanics Abstracts, Vol 32, No.1, pp 11-36.

Interpolation Methods

Bailey, Trevor and Gatrell, Anthony (1995). “Ordinary Kriging.” Interactive spatial data analysis. Longman Scientific & Technical, New York, Ch.5.5

Chugh, A.K. (1981). "Pore Water Pressure in Natural Slopes." International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 5, 449 – 454, John Wiley & Sons Ltd.

Fornberg, B. & Piret, C. (2008). "On choosing a radial basis function and a shape parameter when solving a convective PDE on a sphere", Journal of Computational Physics. Vol 227, pp 2758-2780.

Franke, Richard. (1985). "Thin plate splines with tension." Computer Aided Geometric Design 2, 87 – 95, North-Holland.

Shepard, D. (1968). "A two dimensional interpolation function for irregularly spaced data." Proc. 23rd Nat. Conf. ACM, 517 524.

Wendland, H. (1995) Piecewise polynomial, positive definite and compactly supported radial functions of minimal degree. Advances in Computational Mathematics. 4(1). 389–396.

Liners

Owen, D.R.J. and Hinton, E. (1986). Finite elements in Plasticity theory and practice, Department of Civil Engineering, University College of Swansea, UK, Pineridge Press Limited, Swansea, UK. (Chapter 5.5).

Smith, I.M. and Griffiths, D.V., Programming the finite element method, Second ed., University of Manchester, UK, John Wiley and Sons, New York. (Chapter 4).

Geosynthetics

Esterhuizen, J., Filz, G.M. and Duncan, J.M. (2001). Constitutive Behaviour of Geosynthetic Interfaces, Journal of GeoTechnical and Geoenvironmental Engineering, October 2001, pp 834-840.

Forsman, J. and Slunga, E. (1994). The Interface Friction and Anchor Capacity of Synthetic Georeinforcements, Fifth International Conference on Geotextiles, Geomembranes and Related Products, Singapore.

Bolt Properties

Atlas Copco (2006). Personal communication.

Tomory, P. (1997). Analysis of Split Set Bolt Performance, M.A.Sc. Thesis (Chapter 2), University of Toronto, Toronto, Ontario, Canada.

Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee