The Rocscience International Conference 2021 Proceedings are now available. Read Now
 

Search Results

Liner Type: Cable Truss

The Cable Truss liner type is a specialized option for modeling cable truss support systems, which are sometimes used to support coal mine roofs, for example.

  • A cable truss element provides support in tension only.
  • A cable truss element does NOT support flexural, shear or compressive loads.

Cable truss support is implemented as a liner type in RS2 (rather than a bolt type) because it fits into the general scheme of liner modeling in RS2.

NOTE: for modeling purposes a cable truss is assumed to be a single continuous cable in full contact with the rock. The details of the cable truss installation, cable type and connections are not considered.

Cable truss roof support system

Cable truss roof support syestem

To define the properties of Cable Truss support:

  1. Select Define Liners Define Liners ion from the toolbar or the Properties menu.
  2. Select Liner Type = Cable Truss.
  3. Enter the properties described below.

Geometry

The cable geometry is defined by:

  • Cable Diameter
  • Out-of-Plane Cable Spacing (i.e. the distance between cables along the length of the excavation)

Elastic Properties

The cable Elastic Properties are defined by the Cable Young's Modulus.

Strength Parameters

The cable Strength Parameters are defined as follows:

Material Type: Elastic

If the Material Type = Elastic, then the strength of the cable is not considered (i.e. there will be no upper limit to the tensile load which can be sustained by the cable truss). The cable response will be elastic regardless of the load on the cable.

Material Type: Plastic

If the Material Type = Plastic, you must enter the peak and residual tensile strength of the cable truss.

The peak tensile strength determines the maximum load which can be sustained by the cable truss. If the peak tensile strength is reached, the post-peak yield load is determined by the residual strength. If the residual strength is zero, the cable will carry zero load after yielding.

Pre-Tensioning

To define a Pre-Tensioning force for the cable truss, select the Pre-Tensioning force check box and enter a value.

Stage Cable Properties

The properties of a Cable Truss can be modified at different stages by selecting the Stage Cable Properties check box and selecting the Define Factors button. For details about staging cable properties, see the Stage Material Properties topic, as the general procedure for staging properties is the same.

Staging cable properties could be used to simulate a decrease in cable strength or stiffness over time, due to corrosion for example.

Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee