Expert Modelling: Hands-on help from Rocscience Engineers. Register Here
 

Search Results

Bolt Failure Modes

There are six bolt failure modes that can be reported in RocPlane:

  • Pullout
  • Tensile
  • Stripping
  • Shear
  • User Defined
  • Compression

NOTE: The term "Failure" as used here does not necessarily mean that a bolt has actually failed. It really refers to the potential failure mode of a bolt if wedge failure occurs. Remember that the RocPlane analysis is a limit equilibrium analysis. The actual stresses and deformations of the bolts are not computed.

Pullout / Tensile / Stripping Failure Mode

These are all tensile failure modes and are determined by the Bolt Force Diagram and the point at which a wedge plane intersects the bolt. For examples of Bolt Force Diagrams, see the Bolt Force Diagrams in RocPlane and the topics for the individual bolt types in RocPlane (Mechanically Anchored, Grouted Dowel, Cable Bolt, Split Set / Swellex).

Pullout Failure Modes Tensile Failure Modes Stripping Failure Modes

Pullout, Tensile, and Stripping Bolt Failure Modes

Shear Failure Mode

The Shear Failure Mode is only reported if:

  • The Use Shear Strength option is selected for a given bolt type.
  • A bolt intersects a sliding plane of a wedge (as opposed to a dilating plane)

See Bolt Shear Strength in RocPlane and Bolt Support Force in RocPlane for more information.

Shear bolt failure mode

Shear bolt failure mode

User Defined

If a Bolt Failure Mode is reported as User Defined, this simply means that the bolt (tensile) properties have been defined with a User Defined bolt type (i.e., the user creates an explicit Bolt Force Diagram rather than entering tensile properties).

NOTE: For a User Defined bolt type, it does not matter where a wedge plane intersects the Bolt Force Diagram. The Failure Mode is simply reported as User Defined. The specific modes of Pullout,Tensile, or Stripping are not reported.

Compression Failure Mode

The Compression Failure Mode is reported only under the following circumstances:

Only if all three of these conditions apply is Compression reported as the Bolt Failure Mode.

Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee