The Rocscience International Conference 2021 Proceedings are now available. Read Now
 

Search Results

Overview of Automate from Excel

Automate from Excel can quickly generate results from inputs read in from Excel files. Numerical input data is read in to the RocPlane computation engine from a formatted Excel file and results are generated for each defined case without the need to create a separate RocPlane model file for each.

WARNING: The Automate from Excel feature is dedicated to advanced users who are familiar with the user interface, inputs, and assumptions of the program. Invalid input data will generate invalid results.

To access the Automate from Excel feature of RocPlane:

  1. Select File > Automate Compute > Automate from Excel from the menu.
  2. The Automated Compute dialog will appear allowing you to:
    • Add files to the File Queue for computing
    • Select an Output File Format
    • See the progress of Completed Files
    • See if any issues occured during reading, computing, or writing under Warnings

Input File

The formatting of the input Excel files is specific to program and Analysis Type.

Formatted Excel templates are provided for you and can be accessed by selecting Deterministic Excel Template, or Probabilistic Excel Template from the File > Automate Compute submenu. Each RocPlane Excel template is formatted specifically for use with the corresponding RocPlane analyses.

Automate Compute several Deterministic, and/or Probabilistic analysis cases using saved Excel files created from RocPlane Excel templates.

To add Excel files to the File Queue:

  • Select the Open button to choose individual model files.

NOTE: Only use RocPlane Excel templates provided. Ensure that the correct template type (i.e., Deterministic Excel Template , or Probabilistic Excel Template) is used, which corresponds with the Analysis Type (i.e., Deterministic, or Probabilistic) set in RocPlane Project Settings.

For more information, see the Automate from Excel Deterministic Analysis, and Probabilistic Analysis topics.

Output File

When Automate Compute is run, a directory by the same name as the input model file will be created in the same directory as the input model file.

The results of each model file can be output to either:

  • Comma delimited text file (.txt), or
  • Excel (.xlsx) format

The text output file will be saved inside the Automate Compute Results Text Files subdirectory. The Excel output file will be saved inside the Automate Compute Results Excel Files subdirectory. At least one "Results" file is generated per case computed.

In a Deterministic analysis, one "Results" file per Excel input file is generated.

In a Probabilistic analysis where more than one wedge can be considered, one "Results" file per input case is generated. The result file is formatted to write one wedge per row.

The output file contains the following data:

  • Wedge ID
  • Safety Factor
  • Wedge Weight
  • Normal Force
  • Driving Force
  • Resisting Force
  • Failure Plane Length
  • Upper Face Length
  • Tension Crack Depth
  • Wedge Volume
  • Wedge Height
  • Spill Width
  • Effective Normal Stress
  • Shear Strength
  • Slope Height
  • Slope Angle
  • Unit Weight
  • Upper Face Angle
  • Bench Width
  • Failure Plane Angle
  • Tension Crack Angle
  • Tension Crack Distance
  • Friction Angle
  • Cohesion
  • Ponded Depth
  • Percent Filled
  • Failure Plane Water Pressure
  • TC Water Pressure
  • Seismic Coefficient
  • Seismic Force Angle
  • JRC, Joint Roughness Coefficient
  • JCS, Joint Compressive Strength
  • Phir, Residual Friction Angle
  • UCS, Unconfined Compressive Strength
  • Hoek-Brown m
  • Hoek-Brown s
  • Hoek-Brown a
  • Coefficient a
  • Coefficient b
  • Coefficient c
  • Waviness
  • Maximum Persistence

NOTES:

  • If no valid wedge is formed, Safety Factor = N/A and any computed values will also be N/A.
  • The applicability of some computed values depend on the geometry, strength, force, and water options selected (e.g., any parameter involving the Tension Crack will be N/A if no Tension Crack exists).

Error Log

An Error Log text file (Automate Compute Error Log.txt) is generated for each input Excel file after Automate Compute.

The Error Log reports the total number of errors found (if any), the cell(s) where the error occurred, and the reason why an error occurred. An error will occur if a required parameter cell:

  • Is Blank, or
  • Has a value outside the valid range

NOTE: The Error Log should always be inspected to ensure "No errors found".


Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee