Panning

To select Pan do one of the following:

• Click on the Pan icon in the toolbar.
• Select View > Zoom > Pan.
• Right-click on a blank area of the model and select Pan in the popup menu.
• If you have a mouse wheel, you can Pan by pressing and holding the middle button of the mouse while moving the mouse.

To pan with a mouse without a wheel:

1. Select Pan using one of the methods above.
2. Press and hold the left mouse button.
3. Move the mouse around while keeping the left mouse button pressed.
4. Release the left mouse button when you have reached the new position.
5. Repeat steps 3 and 4 until you are satisfied with the results.
6. Press ESC when you are finished.