Expert Modelling: Hands-on help from Rocscience Engineers. Register Here
 

Search Results

6 - Planes

This tutorial covers the addition of user-defined Planes (i.e., User Planes) in Dips .

Topics Covered in this Tutorial:

  • Add User Plane
  • Major Planes Plot

Finished Product:

The finished product of this tutorial can be found in the Tutorial 06 Planes.dips8 file, located in the Examples > Tutorials folder in your Dips installation folder.

1.0 Model

If you have not already done so, run Dips by double-clicking on the Dips icon in your installation folder. Or from the Start menu, select Programs > Rocscience > Dips > Dips.

If the Dips application window is not already maximized, maximize it now, so that the full screen is available for viewing the model.

Dips comes with several example files installed with the program. These example files can be accessed by selecting File > Recent Folders > Examples Folder from the Dips main menu. This tutorial will use the Example.dips8 file to demonstrate the basic plotting features of Dips.

  1. Select Recent Folders > Example Folder Open Folder Icon option from the File menu .
  2. Open the Example.dips8 file. Since we will be using the Example.dips8 file in other tutorials, save this example file with a new file name without overwriting the original file.
  3. Select Save As Save As Icon option from the File menu.
  4. Enter the file name Tutorial 06 Planes and Save the file.

You should see the Stereonet Plot View shown in the following figure.

NOTE: If the example file has been previously opened and saved, the screen may show a different view or plot, since Dips saves the most recent view state when a file is saved).

If you do not see the plot below, then use the Sidebar Plot Options to view pole vectors and contours on the stereonet.

Stereonet Plot Options

2.0 Adding a Plane

Let’s first add a plane to the stereonet. The Add User Plane option allows you to graphically add a pole / plane to a stereonet plot.

  1. Select Add User Plane Add User Plane Icon option from the toolbar or the Planes menu.
  2. Move the cursor over the stereonet. When the cursor is INSIDE the stereonet, an arc or “great circle” representing the plane corresponding to the cursor location (pole) will appear. Move the cursor around the stereonet, and observe the position of the corresponding plane.



    Note that the cursor coordinates are visible in the status bar. The coordinate display convention can be changed by clicking on the orientation convention option in the Status Bar at the lower right corner of the screen, i.e. Trend / Plunge (pole vector), Dip/DipDirection (plane vector), Strike/Dip (plane vector).
  3. When the plane / pole is at a desired orientation (approximately Trend / Plunge = 45 / 230), click the left mouse button inside the stereonet.
  4. In the Add User Plane dialog:
    1. Enter ID = 1
    2. Enter Label = slope face
    3. Modify the graphically entered Orientation (if necessary). Enter a Trend / Plunge = 45 / 230
    4. Leave the Visibility check boxes at their default selections. Add User Plane dialog
    5. Select OK.

NOTE: If the graphically entered plane orientation is not correct, then simply enter the correct values in the Add User Plane dialog.

The plane / pole will be displayed on the plot, according to the visibility settings chosen, as shown in the figure below.

Stereonet Plot Plane/Pole View

The visibility settings that you choose in the Add User Plane dialog can be modified at any later time in the Edit User Planes dialog.

Planes created with the Add User Plane Add User Plane Icon option in Dips are referred to as User Planes or Added Planes, to distinguish them from Mean Set Planes calculated from Sets. (Sets and Mean Set Planes are discussed in the next section).

This concludes the tutorial. You are now ready for the next tutorial, Tutorial 08 - Kinematic Analysis (Flexural Toppling) in Dips.

Account Icon - click here to log in or out of your account Shopping Cart icon Click here to search our site Click here to close Learning Tech Support Documentation Info Chevron Delete Back to Top View More" PDF File Calendar Location Language Fees Video Click here to visit Rocscience's LinkedIn page Click here to visit Rocscience's YouTube page Click here to visit Rocscience's Twitter page Click here to visit Rocscience's Facebook page Click here to visit Rocscience's Instagram page Bookmark Network Scroll down for more Checkmark Download Print Back to top Single User Multiple Users CPillar Dips EX3 RocFall RocPlane RocSupport RocTopple RS2 RS3 RSData RSPile Settle3 Slide2 Slide3 SWedge UnWedge Commercial License Education License Trial License Shop safe & secure Money-back guarantee