Zoom and Pan

The slope model can be zoomed/panned within the Pillar View in various ways. The following options are available:

• Zoom All - reset the model to its default size and location in the view
• Zoom In - zoom in to 90 % of the original area
• Zoom Out - zoom out to 111% of the original area
• Pan - translate the model left, right, up or down within the view

The zoom and pan options are available in the toolbar, the Zoom sub-menu of the View menu, and through various keyboard and mouse shortcuts, as described below.

Zooming

To zoom, you can use:

• Hold down the SHIFT key and use the zoom toolbar buttons
• Hold down the SHIFT key and use the + / - numeric keypad keys
• Hold down the SHIFT key and use the F2 / F4 / F5 function keys
• Use the Page Up / Page Down keys (Page Up = zoom out, Page Down = zoom in)

Panning

To pan the model:

• Select Pan from the toolbar or press the F10 function key. The cursor will change to the Pan icon. Click and hold the left mouse button in a view, and drag the model to the desired location. To exit the Pan mode, right click and select Done, or press Escape.
• Click and hold the middle mouse button or mouse wheel within a view. The cursor will change to the Pan icon. Drag the model to the desired location, and release the middle mouse button.