|
|
 |
   |
|
   
|
|
Slide Answers
| 1. |
If you are getting errors and you're running an older operating system (Windows 9x/NT), there is likely an incompatibility between your Rocscience software and older operating system files. Rocscience software requires up to date operating system files in order to run properly. Rocscience does not change or alter your operating system files - it is up to users to maintain up to date operating system software.
This problem can easily be fixed by downloading the latest Microsoft system file updater from our website: http://www.rocscience.com/downloads/general/vcredist.exe
Download the file by clicking on the above link. Save the vcredist.exe file to your computer and run it. Follow the directions. It is always advisable to make a backup before installing software that modifies system files.
|
| 2. |
When Interpret is loading, it looks at the date on the input file that is written by the Modeler (the *.sli file) and the date on the results file that is written by Compute (the *.s01 file). Interpret makes sure that you are not looking at out-of-date results, by making sure the results file is younger than the input file. If this is not the case, you will get an error message.
What you may have been doing is pressing Save in the modeler (after you pressed compute, but before you pressed Interpret).
** Any time you press Save in the modeler, you have to run Compute, before you can use Interpret.
** If are you saving these files (or running compute) on another computer (e.g. a network server), then you must make sure the time is the same on both computers (you can get an atomic-clock synchronization program from www.atomtime.com)
|
|
|
|
 |
|
 |
