Rocscience Home
Products Ordering Downloads Support
Software Tools for Rock and Soil
About Rocscience
Workshops
Education
Resource Library
Hoek's Corner
News
Search

Project Gallery

Our Project Gallery contains helpful models from actual rock and soil projects, created by engineers, many using Rocscience software, which have been featured in the Top Projects section of RocNews. We'd love to showcase your project in our Gallery. Contact us at RocNews with your ideas.



A Hydroconsolidation (Collapse)
Case History Using
Settle3D

RocNews Fall 2009
by Thomas F. Blake, Principal Engineering Geologist/Geotechnical Engineer
Fugro West, Inc., Ventrua, California, USA



Shallow Cover Tunnel Under Heritage Listed
Brick Buildings: Brisbane Boggo Road
Busway Tunnel


RocNews Summer 2009
by Ted Nye & Max Kitson
Sinclair Knight Merz, Sydney, Australia



Overcoming Squeezing in the
Yacambu-Quibor Tunnel
in Venezuela


RocNews Spring 2009
by Dr. Evert Hoek
Consultant, Vancouver, B.C., Canada



New Rock Fracture Dynamics Lab Aims to Revolutionize Research in Engineering Geoscience
RocNews Fall 2007
by Dave Collins & Paul Young, University of Toronto
www.lassondeinstitute.utoronto.ca/young



Geological Engineering students at UBC tackle
geological uncertainty in their
Geotechnical design projects..


RocNews Fall 2006
by Dr. Erik Eberhardt, Associate Professor, Univ. of B.C.
Univ. of British Columbia, Earth & Ocean Sciences



The Estimation of Post-Peak Rock Mass Properties
Through Numerical Back Analysis and Calibrated
With In-Situ Instrumentation Data.


RocNews Winter 2006
by Jason J. Crowder & William F. Bawden
Lassonde Institute, Civil Engineering, University of Toronto



Ground deformations above a large shallow tunnel
excavated using jet grouting. Numerical back-
analysis suggests mechanism driving observed
surface deformation patterns.

RocNews Fall 2004
by Stephen Coulter & C. Derek Martin
Civil & Environmental Engineering, University of Alberta



High Angle Technologies shares their approach to
Rockfall Risk Evaluation and their experience
working on the Upper Stillwater Dam Project in the
High Uinta Mountains, Utah.
RocNews Spring 2004
by Doug Hansen
High Angle Technologies



The Analysis of the Stability of an
Anchor Block for a Suspension Bridge. Dr. Hoek
defines the parameters of the problem and using
a variety of software, tests the proposed solutions.

RocNews Winter 2003
by Dr. Evert Hoek
Consultant



What is Virtual Reality (VR)?. The power of VR lies
in the ability to visualize information, so the
engineers makes decisions based on what is seen
rather than the expensive trial and error process.

RocNews Fall 2002
by Peter Kaiser
MIRARCO



Validation of cable bolt support design in weak rock
using SMART instruments and Phase2. Read about
new technologies used to stabilize a shallow underground mining operation in weak rock that was experiencing problems.

RocNews June 2002
by W.F. Bawden & J.D. Tod
Mine Design Technologies



Slope Stability Analysis for Open Pits. Read about
the common methods used in the design and
analysis of different components of the open pit wall
design process.

Rocnews April 2002
by Jose L. Carvalho
Golder Associates Ltd.



Solving a Slope Problem at the Open Pit Mine in
Western Australia. Engineers used Slide to resolve
uncertainties regarding a slope failure in the lake
clay sediments.

RocNews January 2002
by Harry Speight
Snowden Mining Engineering Consultant



Geotechnical Design Project at the University of
Alberta. Using Phase2, the students in Dr. Martin's
CIV E 591 course explored many aspects of tunnel
design.

RocNews November 2001
by Dr. C. Derek Martin
University of Alberta, Civil and Mining Engineering

HOME    |    © 2010 Rocscience Inc.    |    Last Updated March 12, 2010