Zoom and Pan

The slope model can be zoomed / panned within the Wedge View in various ways. The following options are available:

•  Zoom Extents - reset the model to its default size and location in the view

•  Zoom In - zoom in to 90 % of the original area

•  Zoom Out - zoom out to 111% of the original area

•  Pan - translate the model left, right, up or down within the view

The zoom and pan options are available in the toolbar, the Zoom sub-menu of the View menu, and through various keyboard and mouse shortcuts, as described below.

NOTE: you can zoom individual panes of the Wedge View (e.g. the Perspective view), or you can zoom all panes of the Wedge View together. To zoom a specific pane, you must first click in the pane to make it the active pane within the Wedge View.

Zooming Individual Views

To zoom individual panes (e.g. Perspective View, Top view etc), you can use:

• the zoom toolbar buttons

• the mouse wheel (rotate forward = zoom in, rotate backward = zoom out)

• the + / - numeric keypad keys (plus = zoom in, minus = zoom out)

• the F2 / F4 / F5 function keys (F2 = zoom extents, F4 = zoom out, F5 = zoom in)

• the Page Up / Page down keys (Page Up = zoom out, Page Down = zoom in)

Zooming All Views

To zoom all panes within the Wedge View simultaneously:

• hold down the Shift key and use the zoom toolbar buttons

• hold down the Shift key and use the + / - numeric keypad keys

• hold down the Shift key and use the F2 / F4 / F5 function keys

• hold down the Shift key and use the Page Up / Page down keys

Panning

To pan the model within a view:

• Select Pan from the toolbar. The cursor will change to the Pan icon. Click and hold the left mouse button in a view, and drag the model to the desired location. To exit the Pan mode, right click and select Done, or press Escape.

• Click and hold the middle mouse button or mouse wheel within a view. The cursor will change to the Pan icon. Drag the model to the desired location, and release the middle mouse button.