The coordinates of rectangular
or circular loads cannot be edited
with the Edit Coordinates option, however, you can view / copy the coordinates.
The coordinates of embankment
loads cannot be viewed or edited with Edit Coordinates.
To use Edit Coordinates:
Select Edit Coordinates from the Edit
sub-menu of the Loads menu.
In the Plan View, use the mouse to select the
load or excavation you would like to edit. You may only select one load
or excavation.
When you have selected the load / excavation,
press Enter or right-click and select Done Selection.
You will see the Edit Coordinates dialog, which
will display the x,y coordinates of the selected load / excavation in
a mini-spreadsheet. In this dialog, you can enter or edit coordinates
as required. See the Coordinate Table
section in the Entering Coordinates
topic for more details.
Right Click Shortcut
The Edit Coordinates option
is also available as a right-click shortcut. This is actually the most
convenient way to use Edit Coordinates, because you do not have to go
through Steps 1-3 (above), you simply right-click on a load, and select
Edit Coordinates from the popup menu.
NOTE:
the Edit Coordinates right-click shortcut is available in both the Plan
View and 3D View.
from the Edit
sub-menu of the Loads menu.