The current analysis data that you are viewing is indicated in the toolbar at the top of the screen, and in the Contour Legend in the sidebar.
To change the results which are displayed, select the data type that you wish to view from the drop-list in the toolbar.
NOTE: the analysis output variables which can be plotted depend on the type of analysis you are performing. For example: pore water pressure, excess pore water pressure, effective stress, secondary settlement will not appear in the list of output variables, if you are not modeling groundwater or time-dependent settlement.
A brief description of the analysis output parameters is given below. For further information see the Settle3D Theory document.
Total Settlement - the sum of all settlement components (immediate + primary + secondary)
Consolidation Settlement - primary consolidation due to dissipation of excess pore pressure
Immediate Settlement - immediate (undrained) settlement
Secondary Settlement - time-dependent settlement due to creep
Loading Stress - vertical stress due to loading
Effective Stress - total stress minus pore pressure
Total Stress - total stress due to gravity, pore pressure and loading
Total Strain - the total vertical strain including all strain components (immediate + primary + secondary)
Pore Water Pressure - total pore water pressure including excess pore pressure
Excess Pore Water Pressure - excess pore pressure induced by loading
Degree of Consolidation - primary consolidation as a percentage of the ultimate (final) consolidation