|
|
 |
Version 2.36/2.37
| 1. |
Improved support for win2000/WinXP. |
Version 2.35
| 1. |
Program had problems with wedges formed when the strike of one of the joint planes was the same as the trend of the tunnel. |
Version 2.34
| 1. |
Fixed a scale problem with very small diameter holes. |
| 2. |
Increased the number of significant digits in the output of wedge weights and bolt forces. |
| 3. |
Increased the size of the edit boxes in the wedge sizing dialog. |
Version 2.33
| 1. |
Fixed a problem with adding pattern bolts. Under certain very rare situations, a domain error occurred when adding pattern bolts. This caused the program to behave abnormally. Results are not affected. |
| 2. |
PCX screen dumps of the view window in B&W mode did not work correctly. |
| 3. |
Full extended memory past 16MB is now utilized. |
Version 2.32
| 1. |
Hardlock code for Windows NT was added. This results in faster execution times in NT 3.51. Note that you still need to load the NT driver for NT 3.51, this can be downloaded from our web site or requested from our distribution office. |
Version 2.31
| 1. |
Changed version control to allow internet updates for all users of version 2.0 or greater due to bug in plane area calculation. |
| 2. |
Added update.txt file to keep track of bug fixes. |
Pre- Version 2.3
| 1. |
Prior to version 2.3, Unwedge sometimes incorrectly calculated the areas of the wedge planes resulting in incorrect factors of safety when water or cohesion were used. |
|
|
|
 |
|
 |
