|
|
 |
Version 4.048
| 1. |
Fixed a bug which altered the energy
of a rock incorrectly after it slid into a barrier and exceeded
the barrier’s capacity. |
| 2. |
Changed the drawing
code so that rock paths aren’t updated every time a rock
is thrown, only after ALL rocks are thrown, greatly increasing
computation time. |
Version 4.047
| 1. |
Fixed a bug which caused the program
to crash if the user hit File...Close after reading in a file. |
| 2. |
Fixed a bug which caused
barriers and data collectors to move incorrectly when std.
deviation was applied to the slope. |
Version 4.046
| 1. |
Converted help system
from winhelp to webhelp to be compatible with Windows Vista. |
| 2. |
Re-organized start
menu folders and links. |
| 3. |
If a linear portion
of a slope was divided into smaller segments by adding extra
vertices, rocks which were in sliding mode would slow down
at each vertex, even if the line segments had the same material
properties. This has been fixed so that rocks in sliding mode
do not lose velocity when crossing a vertex of co-linear line
segments with the same properties. |
| 4. |
Adding barriers or data collectors
no longer affects the pseudo-random results. |
| 5. |
Updated technical support dialog. |
| 6. |
Improved User Interface look under
Windows XP and Vista. |
| 7. |
Toolbars no longer
split into two rows. |
Version 4.045
| 1. |
Fixed a bug which caused
rocks to register multiple hits on barriers instead of sliding
down them. This caused errors in the data charts. |
Version 4.044
| 1. |
Barriers did not use
the capacity with sliding rocks (they had infinite capacity).
This bug was introduced in version 4.043. Fixed. |
Version 4.043
| 1. |
Fixed a bug which caused the program
to time-out when a sliding rock with downslope velocity intercepted
but did not break a barrier. |
| 2. |
Improved printing code.
On certain printers (or with certain outdated printer drivers),
the program would crash when trying to print. |
Version 4.042
| 1. |
Now supports multiple
HASPHL locks on the same USB hub. |
Version 4.041
| 1. |
Fixed a bug where a slow moving
rock could pass under a barrier and be recorded improperly
on a data collector. |
| 2. |
Menu checkmarks would
sometimes not be rendered correctly. |
Version 4.040
| 1. |
New Hasp-HL hardlock
support. Removed support for old beige hardlocks. |
Version 4.039
| 1. |
Support for new Educational
system. Also update dll's to latest microsoft versions. |
Version 4.038
| 1. |
Additional Documentation
"Determining Input Parameters for a RocFall Analysis"
tutorial is now installed with RocFall. It is available in the
program (RocFall->Slope->Material Editor->Tutorial)
or (RocFall->Help->Manuals->Determining Input Parameters),
and from the Windows Start menu. |
Version 4.037
| 1. |
In certain cases, rocks that were sliding uphill AND off the end of a segment, would cause problems. (e.g. if a rock bounced off a barrier, and traveled up slope). This is fixed. (rocks sliding downhill were not effected). |
Version 4.036
| 1. |
Improved import of CRSP files that have many adjacent cells with the same properties. |
| 2. |
Improved printing |
| 3. |
Hardlock and Nodelock software upgrade. |
| 4. |
Exit velocity of the rock was not calculated correctly when rocks broke through barriers. The error only effects rocks after they have broken through barriers. |
Version 4.034
| 1. |
Improved performance for beige hardlocks. |
| 2. |
Update to auto-update code and nodelock code. |
| 3. |
Bug fix for network version and path path dialog. |
Version 4.033
| 1. |
EMF/WMF image files now export correctly. |
| 2. |
Improved license management for network versions. |
| 3. |
Improved look under WinXP. |
| 4. |
Bounce Height Envelope did not always load correctly, after a file was saved, and re-loaded. This is fixed. |
Version 4.032
| 1. |
Data Tips were inadvertently turned off with no way of turning them on. This has been fixed. |
Version 4.031
| 1. |
Printer logic has been changed. Printers are now set up just before printing. This isolates a problem with printing to some HP printers due to a HP driver bug. |
Version 4.03
| 1. |
Automatic update technology added. Customers with a web connection will automatically be notified and allowed to update when a new minor version is released. |
| 2. |
A new splash screen. |
| 3. |
Nodelocking now possible. |
Version 4.02
| 1. |
Printing without print-preview could cause the slope to be offset to the side of the page. |
| 2. |
Large standard deviations could cause negative values for the mass of the rock. There is now a check to prevent this from happening. |
| 3. |
Double-click on seeders and barriers to edit their properties. |
| 4. |
Barrier Editor dialog now has cancel. |
Version 4.01
| 1. |
Some version 3 files would not open if they contained rock paths. |
| 2. |
Added an Invert Filter option to the Rocks menu. The option sets unfiltered paths to be filtered and filtered paths to be unfiltered. This is useful for locating paths that did NOT impact a barrier. |
|
|
|
 |
|
 |
